Cummins Generator Governor is an important part of the generator, Governor failure occurs mainly in the following the most common situation，
We simply introduce, the generator tune the corresponding elimination method.
Speed (the speed of its sudden failure, so that more than 110% of the speed calibration speed)
1）Speed is too high
Methods of exclusion: emergency stop, disconnect the fuel from the fuel or cut into the intake and other measures to stop the engine immediately.
2）Adjust the gear lever or throttle lever to die
Troubleshooting: check each part, open the speed limit screw seal seal after re adjustment.
3）Adjust the connecting pin of the gear rod and the pull rod to fall off.
Troubleshooting: Overhaul
4) pull rod screw off
Troubleshooting: re installed or replaced
5) pull rod screw off
Troubleshooting: re installed or replaced
6）Governor spring fracture
Troubleshooting: re installed or replaced
7）Governor spring fracture
Troubleshooting: re installed or replaced
8）Regulating tooth rod and rod connecting pin falling off
Troubleshooting: Overhaul
Related reading: cummins electronic governor 3037359 electronic speed controlle governor
