What should be paid attention to when the tractor changes speed?
(1)When shifting, the clutch pedal should be pressed to the bottom, so that the clutch can be completely separated before shifting, so as to avoid gear collision during shifting, causing gear tooth end wear and abnormal noise from the gearbox.
(2)Do not shift too hard. If the teeth of the meshing gear are against each other and the gear cannot be engaged, the clutch shall be slightly combined to stagger the two teeth ends, and then the clutch shall be disengaged to engage.
(3)Before the truck tractor goes up and down the slope, it should change the low gear in advance according to the situation. It is forbidden to change the gear in the uphill and downhill to prevent the tractor from sliding in neutral gear and causing accidents.
(4)When shifting gears, look at the road ahead, hold the steering wheel, and pay attention to the road and pedestrians and vehicles.
