Line Filter 2901207926 2901207946

Little Knowledge

How to install the line filter 2901207926 2901207946 of Atlas Copco air compressor?

To install the line filter 2901207926 2901207946 of Atlas Copco air compressor, please follow these steps:

1.Ensure that the air compressor is turned off and disconnected from the power source before starting the installation process.

2.Locate the existing line filter in the air compressor system. It is typically positioned along the compressed air line.

3.Use a wrench or suitable tool to loosen and remove the fittings or connections on both ends of the existing line filter.

4.Carefully remove the old line filter from its position, taking note of the orientation and direction of flow.

5.Take the new filter element, 2901207926, and check for any packaging or protective covers. Remove them if present.

6.Align the new filter element in the same direction as the old one, ensuring that the arrows indicating the flow direction are correctly oriented.

7.Apply a thin layer of lubricant or sealant to the threads of the fittings or connections on both ends of the filter.

8.Connect one end of the new line filter to the compressed air line, ensuring a secure and tight fit.

9.Connect the other end of the line filter to the air compressor system, again ensuring a secure and tight fit.

10.Use a wrench or suitable tool to tighten the fittings or connections on both ends of the line filter.

11.Once all connections are tightened, double-check for any leaks or loose connections.

12.Turn on the air compressor and observe the system to ensure proper operation and that the new line filter is working effectively.

It's important to note that this is a general guide for installing an air compressor line filter. It's always recommended to consult the manufacturer's instructions and guidelines specific to your Atlas Copco air compressor model.