Line Filter 85565505 85565513 85565521 85565539

Introduction

How to replace the line filter element of the air compressor?

To replace the line filter element of an air compressor, you can follow these steps:

1.Make sure the air compressor is turned off and disconnected from the power source for safety.

2.Locate the line filter element, which is usually located near the air compressor's intake valve or on the air receiver tank.

3.Prepare the necessary tools, such as a wrench or a socket set, to remove the filter housing. Note down the size of the filter element for purchasing a replacement.

4.Loosen the bolts or fasteners that secure the filter housing in place. Use the appropriate tool to remove the housing cover.

5.Once the cover is removed, you will see the line filter element. Carefully take it out from the housing, making sure not to drop any debris into the compressor system.

6.Clean the housing and inspect it for any signs of damage or wear. If necessary, replace the housing or any damaged parts.

7.Install the new line filter element into the housing, ensuring it is properly seated. Make sure the element matches the specifications and size of the original one.

8.Place the housing cover back on and secure it with the bolts or fasteners. Tighten them securely but avoid over-tightening.

9.Reconnect the air compressor to the power source and turn it on to test its functionality.

Remember, it's important to consult the manufacturer's instructions or the user manual for specific guidelines on replacing the line filter element of your air compressor. Safety precautions and procedures may vary depending on the model and brand.

Cross Reference:

85565505--Hifi SI 35901

85565513--Hifi SI 35902

85565521 85565539--Hifi SI 35903