Attentions For First Time Starting Generator
Before starting the diesel generator, a series of measures must be taken to determine the actual technical status of the equipment. In the work list, you must complete the following tasks:
1.Check whether the charging condition and wiring of the battery are correct, and consider the polarity at the same time.
2.Open the feeler gauge on the crankcase of the internal combustion engine, check the existing oil level, and fill up to the required amount if necessary.
3.After refueling, the system pressure must be increased by pressing the resolver, which can reduce the pressure in the combustion chamber and simplify the rotation of the crankshaft, and then start the starter several times until the low oil level signal indicator goes out.
4.If there is a liquid cooling system, check the level of antifreeze or water.
5.Before starting the diesel power station, check whether there is fuel in the fuel tank. At this time, please pay attention to the salt used and use winter or Arctic fuel at low ambient temperature.
6.After opening the fuel cock, exhaust the air from the system. To do this, loosen the fuel pump nut for 1-2 turns. When opening the resolver, turn the starter until there is a stable fuel flow without bubbles. Only after these operations are completed can the equipment be considered ready and the diesel power station be allowed to start.
