News -China Everlasting Parts Co.,Limited.

What is the purpose of the oil-water separator on board?
Dec, 16, 2022

What is the purpose of the oil-water separator on board? The main purpose of the oil-water separator is to separate hydrocarbons from the oily water from the ship's bilge and discharge cleaner sewage overboard according to IMO MEPC 107 (49) regulations.

Read More
When do I need an air oil separator?
Dec, 16, 2022

When do I need an air oil separator? If you are not sure whether you need AOS, this is a list of the most common reasons why you may need AOS. Improve performance drive In general, AOS helps keep the engine clean and running smoothly. When oil residues accumulate in the engine, performance is reduced. It also recycles oil to improve efficiency. Excessive oil loss If the engine...

Read More
Whether the oil separator is the same as the capture tank
Dec, 16, 2022

Whether the oil separator is the same as the capture tank Air oil separator (AOS) or catch tank is used to intercept oil vapor passing through PCV system and collect residual oil. For this reason, the two devices work ian the same way and have different results. Some types of baffles or filters are used to encourage oil vapors and oil droplets to fall out of the suspension and remain in the...

Read More
How to replace filter element of oil-gas separator of air compressor
Dec, 16, 2022

How to replace filter element of oil-gas separator of air compressor The oil leaving the compressor through the discharge port can be separated from the refrigerant and returned to the compressor crankcase by installing an oil separator. When the lubricating oil consumption of the air compressor increases significantly, check whether the oil filter, pipeline, oil return pipe, etc. are block...

Read More
What are the advantages of the air oil separator?
Dec, 16, 2022

What are the advantages of the air oil separator? The oil-gas separator is a valuable supplement for many vehicles, especially those that are easy to accumulate oil in the blowby. Here are some of the main advantages of using this component: 1. Avoid oil accumulation: The main reason for using the air oil separator is to avoid oil circulating into the cylinder. This will oil the air inlet a...

Read More
How to repair or replace the oil separator
Dec, 16, 2022

How to repair or replace the oil separator Open the separator container and replace the separator filter. Make sure that the new filter is the same size as the old filter. If it is long or short, be sure to adjust the length of the return pipe. Make sure to use the supplied gasket, because the gasket contains metal conductors, which can prevent static electricity from accumulating in the se...

Read More
Operating principle of air oil separator
Dec, 16, 2022

Operating principle of air oil separator Most of the oil is separated by centrifugal force. The air oil mixture enters the separator container at a certain angle, so most of the oil is pushed outside and falls into the oil container. Generally, splash shields are installed to prevent the air oil mixture from directly impacting the separator filter, and 85% of the oil is separated in this wa...

Read More
What is an Air Oil Separator?
Dec, 16, 2022

What is an Air Oil Separator? Definition – The oil-gas separator is a filter like component used to separate oil from compressed air. Function – During the process when the compressor oil is injected to lubricate, seal and absorb the compression heat, the mixture of compressed air and oil flows out of the compressor element. The oil separator separates the oil from the air, beca...

Read More