Relationship between oil seal and mechanical seal 1.Sealing method: The shaft seal is sealed by pressing two or more smooth ceramic pieces with spring force; The purpose of the oil seal can onl...
Precautions For Radiator Ventilation When the radiator is installed at the end of the engine, the radiator is as close as possible to the exhaust port, otherwise hot air may flow back. It is recommend...
Heat Exchanger Function And Features About heat exchanger 1.Fin type 2.Plate-type 3.Shell-and-tube Heat exchanger system 1.Air cooling/cold air system 2.Air cooling ...
Silent container Precautions Silent diesel genesets are widely used in the market today, this unit is suitable for noise in the urban environment, silent noise reduction material for diesel gen...
Avoid radiator corrosion Diesel generators will generate a lot of heat during operation. If the heat cannot be dissipated, it will cause damage to the engine, soplease keep good heat dissipation.In or...
Diesel Generator Radiator Air Bubbles Air bubbles in the generator radiator are usually caused by the high-pressure gas in the cylinder escaping into the cooling water channel. Below are reason...
Comprehensive Cooling Solution For Generator If the heat dissipation of the generator is not good, it will cause many other faults, such as the power drop,udden shutdown,the peculiar smell, poo...
Diesel generator installation requirements 1.The space around the diesel geneset should be no less than 1 meter. The radiator should be placed with a ventilation window according to the size of...
Radiator with belt pulley Instruction Belt installation steps 1.Confirm that the dimension C in the below picture is consistent with the installation dimension of radiator. This size must be gu...
Prevention Of Generator High Temperature High water temperature of diesel engine will usually cause boiling coolant in the radiator , the power decreases, the viscosity of the lubricating...
Generator in the rainy season 1.In rainy season. In order to prevent lightning strike, the grounding line should be connected to the base of the unit.Open generator set is not recommended in ra...
Aircooled and watercooled generators difference Air-cooled generator is a generator with a single-cylinder engine or a double-cylinder engine. One or more large fans are used to force the exhau...
